D M Standen's reputation as a valued supplier to the Arborist Industry is well established. Keeping up with international trends and customized requirements through a large network of suppliers, we carry a wide range of the specialized equipment needed.

Sequoia SRT

• Extra-wide, semi rigid waistband offers great support and exceptional ventilation
• Waistband and suspension seat lined with breathable perforated foam for maximum comfort when  suspended
• Ventral attachment bridge provides lateral mobility
• Ventral attachment bridge is attached to the waistband and to the leg loops by two gated rings in order to:

- distribute the pressure evenly between the waistband and leg loops (three positions)
- adapt the length of the ventral attachment bridge or install two ventral attachment bridges
- to attach the RING S or SWIVEL directly to the attachment bridge

• Ventral attachment point and the rear waistband buckle used to attach the CROLL ventral rope clamp for  ascending a single rope
• The two lateral attachment points transfer the weight evenly around the waistband for comfortable surface-supported work
• Five equipment loops with protective sheath
• Two rings for attaching a hand saw
• Slots for CARITOOL tool holder
• Waistband equipped with self-locking DoubleBack buckles
• Leg loops equipped with FAST automatic buckles

Sequoia

• Extra-wide, semi rigid waistband offers great support and exceptional ventilation
• Waistband and suspension seat lined with breathable perforated foam for maximum comfort when  suspended
• Ventral attachment bridge provides lateral mobility
• Ventral attachment bridge is attached to the waistband and to the leg loops by two gated rings in order to:

- distribute the pressure evenly between the waistband and leg loops (three positions)
- adapt the length of the ventral attachment bridge
- to attach the RING S or SWIVEL directly to the attachment bridge

• Easy to slip on with the FAST waistband and leg loop buckles
• The two lateral attachment points transfer the weight evenly around the waistband for comfortable surface-support work
• Five equipment loops with protective sheath
• Two rings for attaching a hand saw
• Slots for CARITOOL tool holder

Sequoia Swing

• Extra-wide, semi rigid waistband offers great support and exceptional ventilation
• Intergrated seat with independant leg loops provides mobility and freedom of movement
• Seat width is adjustable to reduce bulk and facilitate movement within the tree
• Easy to don with FAST buckles on the waistbelt and leg loops
• Intergrated seat with independant leg loops provides mobility
• Attachment bridge provides lateral mobility
• Attachment bridge is attached to the waistbelt and to the leg loops by two gated rings in order to":

- adjust the weight distribution between the waistbelt and the leg loops
- adapt the length of the attachment bridge or install two attachment bridges
- attach the RING S or the SWIVEL directly to the attachment bridge

• The two lateral attachment points transfer the weight evenly around the waistbelt for comfort when leaning back in the belt (with support for the feet)
• Five equipment loops with protective sheaths
• Two rings for attaching a hand saw
• Slots for CARITOOL tool holder

Attachment bridges C69200 Attachment bridges for SEQUOIA harness Available in three sizes: - C69200 25: 25 cm - C69200 30: 30 cm - C69200 35: 35 cm	Ring S C04620 Connection ring Installs directly onto the SEQUOIA harness' s attachment bridge to improve the climber s lateral mobility

For more Bags click here

• An innovative redirection pully for the special requirements of rope climbing
• Can be equipped with a Loop Runner or Rope Sling
• Certification: EN 12278
• Carabiners are not required as Loop Runner or Sling is secured by a round nut and tightened by hand (No tools needed)
• Equipped with a friction ring and a safety ring

• Multi-functional ascending and descending
• Rope runs through the rope duct without any noticable rope slackening
• The rope can be shortened one handed while under load
• Operator can choose between two operating modes
• For ropes from 11 to 13 mm dia
• Does not require more than 1 carabiner
• Certification: EN 358

• State of art designed rope jammer
• Can be shortened one-handed and lengthened under load
• Postioning is absolute and without jolts
• Works on 11mm - 13mm ropes and sheathed flexisteel cables
• Available with carabiner joined either rigidly or via swivel

Lockjack Basic LKS13
Lockjack with Swivel LKS13W
Lockjack Twin Steel LKT13
Lockjack Twin Dyneema LKT13W
Easy to manage Ascending/Descending Device

• Facilitates a controlled, dynamic movement at the periphery of branches

• Fall arrest energy absortion down to 6kN
• Retrievable from the ground via dyneema sling and retrieval shackle
• Easily sliding adjuster movement even after heavy loads
• Continuously adjustable length
• Secure self-jamming without increase of the fall arrest distance
• Lightweight and compact

Double Snapper

Double Snapper RG02-D
Rope Guide Retrieval System

• Designed for the retrieval of the Ropeguide via a single length of the throwline
• The throwline must be 4 times the height of the installation for a controlled retrieval

Climbing Ropes

Donaghys has worked closely alongside certified Arborists and champion tree climbers to develop a range of arbour ropes you can hang your life on.  Donaghys Arboriculture range includes climbing lines, access lines, prusik lines, rigging, lowering and crane lines.  The range has been certified to both Australian and International standards, developed off US benchmarks. 

Note that in New Zealand, only Armor-Prus and Spectra prusik lines meet the Arboriculture Approved Code of Practice.  All Donaghys climbing and safety lines also meet this standard.

Spark

Constructed using a tough 16 strand braided polyester cover with a
kernmantle core then stabilised to create an ideal hard wearing
cost effective climbing rope

• Fully splicable cover dependant construction
• Low stretch
• 12 mm for easy grip while retaining a light weigth climbing line
• Wears well with high abrasion resistant low snag poyester cover
• Kernmantle core construction
• Highly visible
• Meets ANSI Z-133 standards

nrg

NRG is a high performance 12 mm 24 strand climbing rope designed
for use in sport climbing and professional Arborist applications. NRG is
light weight with excellent knot holding abilities and allows easy acess
into trees with great foot locking capabilities

• Knobbly cover construction for easy handling
• Excellent bend ratio
• Light weight
• Low stretch for excellent foot locking
• Kernmantle construction
• Works well with hardware
• Meets ANSI Z-133 ctandards

Armor-Plus

A unique cover blend of Technora and polyester acts like Armor over a core of light weight SpectraO R 900.
Spectra core incorporates a world first safety feature of twin Kevlar strands preventing the core from being cut OR or melted completely in the unlikely event of a cover failure

• Blended Technora cover to prevent melting and glazing
• Very low stretch
• Light weight Armored SpectraO R /Kevlar safety core
• Technora is rated 234 C higher than standard polyester
• Easy to splice
• Meets ITCC climbing comp rules