visit our shop

Download the Petzl Catalouge
For more information, visit www.petzl.com

Petzl Lanyards

Restraint and Work Positioning


Restraint and work positioning lanyards are used with a work positioning harness. They are designed to limit movement or for hands free work while in position. There are adjustable and nonadjustable lanyards.


Durability

  • The plastic sheaths on the terminations hold the connector in place and protect the lanyard ends from
  • abrasion.
  • The nylon rope used (semi-static or dynamic) is abrasion and wear resistant.
  • The sewn terminations have a clean finish.


Grillon

Grillon L52A
Adjustable lanyard for work positioning work positioning
  • Lanyard with fine adjustment system for precise
  • Can be used in two ways:
- double mode, on the harness lateral attachment to distrubute weight between the waistband and the operating handle while holding the free end of the lanyard Removable protective sheath protects the rope from abrasive contact and favours smooth rope glide. The protection can be removed when the single lanyard technique is used, to bring the user closer to the anchor.
  • Available in several lengths:
- GRILLON (L%@52A 002): 2 m, 435 g
- GRILLON (L%@52A 003): 3 m, 515 g
- GRILLON (L%@52A 004): 4 m, 595 g
- GRILLON (L%@52A 005): 5 m, 675 g
-Certification, CE EN 358


All GRILLON lanyards have a handle which allows the lanyard to be used in single mode when connected to the harness ventral attachment point. The handle allows the cam to be unlocked (while holding the free end of the rope) when the user is adjusting his position.

Progression - Spelegyca

Spelegyca C44
Asymmetrical sewn flat webbing Y-shaped lanyard
  • Only for roped manoeuvres (for example with an ASCENSION handled rope clamp).
  • Asymmetrical Y-shape for increased ease of use and safety while moving:
- can connect short or long depending on progression needs
- The two arms allow the user to remain connected to an anchor when passing intermediate anchor points.
  • Terminations equipped with a STRING to hold the connector in place and to protect against abrasion.
  • Sewn fl at webbing for more resistance to abrasion and aging.

The Spelegyca is not an energy absorber.

Grillon Hook

Grillon Hook L52H
Lanyard with fine adjustment system for precise HOOK connector
  • Adjustable work positioning lanyard with work positioning
  • Used in double mode on the harness lateral attachment points, to distribute the weight on the belt (user has weight on his feet): length is adjustable by pressing on the pivoting cam)
  • Can be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops (user is suspended): length is adjusted by operating the handle while holding the free end of the lanyard (it is necessary to open the device to remove the protective sheath)
  • Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide
  • Available in several lengths:
- GRILLON (L%@52H 002): 2 m, 625 g
- GRILLON (L%@52H 003): 3 m, 735 g
- GRILLON (L%@52H 004): 4 m, 815 g
- GRILLON (L%@52H 005): 5 m, 895 g


Grillon MGO

Grillon MGO L52M 03
  • Lanyard with fine adjustment sys tem for precise Adjustable work positioning lanyard with work positioning
  • Used in single mode on the harness ventral attachment points, to distribute the weight between MGO large openingconnector the waistbelt and the leg loops (user is suspended): lenght is adjusted by operating the handle while holding the free end of the lanyard
  • Available in one length:
- GRILLON (L%@52M 003): 3 m, 995 g
Certification: CE EN 358

Energy Absorbers

Energy absorbing lanyards are part of a fall arrest system. Energy absorbing lanyards should be used only after checking that there is adequate clearance under the user.

  • The energy generated by the fall is absorbed by the tearing of the special stitching.
  • The absorber is protected from abrasion and protrusions by a zippered pouch.

Absorbica

Absorbica L57
Sewn webbing energy absorber
  • Often used in combination with a lanyard to build an energy absorbing lanyard with a maximum length of 2 metres.
  • Terminations equipped with STRING.
  • Compact and lightweight.
Absorbica-I

Absorbica-I
Energy absorber with integrated single lanyard
  • Designed for protection on a lifeline (rope or cable)
  • Mesh pouch with zipper protects the energy absorber from abrasion or
  • The energy of the fall is absorbed by the tearing of specific webbing
  • Energy absorber end equipped with STRING
  • projections and allows regular verification of the asorber' s condition
  • Available without connector or with MGO large-opening connector, so in two lengths
- ABSORBICA-I 80 (L58): 0.8 m
- ABSORBICA-I 80 MGO (L58 MGO): 1.05 m
- ABSORBICA-I 150 (L70150 I): 1.5 m
- ABSORBICA-I 150 MGO (L70150 IM): 1.75 m



Absorbica-Y

Absorbica-Y
Energy absorber with integrated double lanyard
  • Designed for passing intermediate points on fixed protection
  • Mesh pouch with zipper protects the energy absorber from abrasion or
  • The energy of the fall is absorbed by the tearing of specific webbing
  • Energy absorber end equipped with STRING projections and allows regular verification of the asorber s condition
  • Available without connector or with MGO large-opening connector, so in two
lengths
- ABSORBICA-Y 80 (L59): 0.8 m
- ABSORBICA-Y 80 MGO (L59 MGO): 1.05 m
- ABSORBICA-Y 150 (L70150 Y): 1.5 m
- ABSORBICA-Y 150 MGO (L70150 YM): 1.75 m

Jane

Jane L50 - 53
Non adjustable dynamic rope lanyard
  • Can be combined with a ABSORBICA energy Absorber to set up an energy-absorbing < I > or < Y > lanyard of less than two meters in length
  • Sewn ends protected by plastic sheath to hold the connector in place and protect the terminations from abrasion
  • Available without connector or with large-opening MGO connector for attachment to metal structures, cables and large diameter bars (large-opening, autolocking connector permanently sewn into the lanyard termination)
  • Lanyards without connector
- JANE 0.6 m (L50 60): 110 g
- JANE 1m (L50 100): 130 g
- JANE 1.5 m (L50 150): 185 g
- JANE 2 m (L50 200): 225 g
  • Lanyards without connector
- JANE MGO 0.6 m (L53 60): 565 g
- JANE MGO 1 m (L53 100): 585 g
- JANE MGO 1.5 m (L53 15): 640 g

Certification: CE EN 354


Download the Petzl Catalouge
For more information, visit www.petzl.com

We stock products from the Industry's Leading Suppliers